Knowledgebase: outmail
How to setup a SmartHost in Exchange 2013?

Problem:

How to setup a SmartHost in Exchange 2013?
How to setup Exchange 2013 to use outMail as a Mail Relay?

Solution:

Follow the guide below to configure Microsoft Exchange 2013 to use outMail as the SmartHost and Internet Mail Relay.

This article already assumes your exchange system is able to send emails externally and therefore a Send Connector has already been created and configured correctly.

  1. Open Exchange Admin Center
  2. Navigate to Mail Flow -> Send Connectors and select the send connector
  3. Choose the Route mail through smart hosts option from the delivery section
  4. Click Add+ in the Add smart host window
  5. Enter the server address you have been given in your welcome email (mxXXXXXX.smtp-engine.com)
  6. Select Basic Authentication and enter the username and password you were also provided. and click Save.

  7. Under Address Space from the scoping section, click Add+ in the Add Domain window.
    Select Type as SMTP
    Enter * in the Fully Qualified Domain Name (FQDN)
    and Save.

  8. For the Source Server click Add+ in the Select a server window.
    Select a mailbox server that will be used to send email to the Internet via the Client Access server

The changes you've made will take effect straight away without you having to reboot the server or restart any services.

 

Summary of server details

Outgoing server

mxXXXXXX.smtp-engine.com

As provided in your signup email.

Outgoing server protocol

SMTP

Outgoing server port

25, 587, 2525 or 8025

Authentication Type

Basic Authentication

Username

As provided

Password

As provided

 

(0 vote(s))
Helpful
Not helpful





Disclaimer
The Origin of this information may be internal or external to Prolateral Consulting Ltd. Prolateral makes all reasonable efforts to verify this information. However, the information provided in this document is for your information only. Prolateral makes no explicit or implied claims to the validity of this information. Any trademarks referenced in this document are the property of their respective owners.