Knowledgebase: outmail
How to setup outmail for Pegasus?

Problem:

How to setup outmail for Pegasus?
How to setup Pegasus to use outMail as a Mail Relay?

Solution:

Follow the guide below to configure Pegasus to use outMail as the outbound mail server.

This article already assumes your Pegasus application is already installed and configured, and you are changing your outbound email server to the outmail system.

Open Pegasusand click on Tools > Internet options...

Pegasus Tools Internet Options

In the window that appears, select the Sending (SMTP) tab.

Pegasus Sending SMTP

Select the required SMTP host (if there is more than one), and click Edit...

Pegasus Sending Settings

On the General tab, in the Server TCP/IP port, enter the desired port to use for outbound email - either 25, 587, 2525 or 8025.

It is likely that port 25 may be intercepted by your ISP, so one of the other ports is recommended.

Now click on the Security tab.

Pegasus Sending Security

Ensure that the Use SSL/TLS setting is set to 'Never'.

Tick the box next to Login to the SMTP server using the following details

Enter the outmail username and password you were sent in your 'outMail Service Information' email.

Click OK on all the open windows, and you should now be able to send out through outmail.

Video Tutorial

 

 

Summary of details

Outgoing server

mxXXXXXX.smtp-engine.com

As provided in your signup email.

Outgoing server protocol

SMTP

Outgoing server port

25, 587, 2525 or 8025

Username

As provided

Password

As provided

(109 vote(s))
Helpful
Not helpful





Disclaimer
The Origin of this information may be internal or external to Prolateral Consulting Ltd. Prolateral makes all reasonable efforts to verify this information. However, the information provided in this document is for your information only. Prolateral makes no explicit or implied claims to the validity of this information. Any trademarks referenced in this document are the property of their respective owners.